I have stripped off some streams of general interest.
Some of the cuts made here may effect your use of these files-
please read carefully if you plan on using these files.

I tightened the patrec cuts from standard mod13:
YF2DPR=.03   front magnet Y-match
YB2DPR=.03   back magnet Y-match
PM2DPR=.05   2-d stage front/back momentum 
PM3DPR=.05   3-d stage front/back momentum 
VCUTPR=.05   vertex doca 

Events were passed or failed based only on the first patrec vertex
(with one notable exception in the ee stream- see below.)

7 streams:

minbias - unprescaled, only required events to pass patrec.

              input QG tapes                   
 Kart name    (pass2 output)        year
---------------------------------------------
    QG0622    (274-295)            '95 data
    QG0623    (296-313, 555-558)   '95 data
    QG0624    (559-579)            '95 data
    QG0625    (224-248)            '96
    QG0626    (249-273)            '96
There is about 1 Gigabyte of data on each tape

mumu - unprescaled, Mass > 480 MeV, Pt < 30 MeV.
     PID requirements (on both sides): 
     -> possible TSC
     -> NOT possible PBG electron
     -> NOT possible CER elec if P < 6.3GeV
     -> good MHO muon
     -> good MRG muon

     115 output files ('96 first 50 files, then '95)
     on kart RG1524

pipi - prescaled by 5, Mass > 470 MeV, Pt < 30 MeV.
     PID requirements (on both sides):
     -> possible TSC
     -> PBG pion (E/p < .5)
     -> NOT possible CER elec if p < 8.3
     -> NOT possible MHO muon
     -> NOT possible MRG muon

     115 output files ('96 first 50 files, then '95)
     on kart RG1523

ee   - no prescale, Mass > 470, Pt < 30
     PID requirements (on both sides):
     -> possible TSC
     -> possible PBG elec
     -> possible CER if p < 6.3 GeV.

     Additionally (for this stream only), the event will be vetoed 
     if there is a vertex (even one that doesn't satisfy the PID 
     requirements above) in the signal box ( 490 < M < 510 and
     Pt < 10 MeV.)

     2 output files (R95.ee.filt, R96.ee.filt)
     in ~e871/strip on morgan at SLAC.

Particle datasets-
   I used the same event selection criteria as Scott did for the
   previous datasets, see this website for details:
   http://hep.utexas.edu/trk871/memos/dsmemo/dsmemo.html

   electrons: prescaled by 4
      IEVTEK(1,5) bit 0 -> left side electron
                  bit 1 -> right side electron
      5 datafiles on kart RG1525 (each file corresponds to one 
      of the input minbias karts, i.e., first 3 are '95 data, 
      last 2 are '96)
   
   muons: prescaled by 2
      IEVTEK(1,5) bit 2 -> left side muon    
                  bit 3 -> right side muon    
      5 datafiles on kart RG1526 (each file corresponds to one 
      of the input minbias karts, i.e., first 3 are '95 data, 
      last 2 are '96)
  
   pions: prescaled by 6
      IEVTEK(1,5) bit 4 -> left side pion    
                  bit 5 -> right side pion    
      5 datafiles on kart RG1527 (each file corresponds to one 
      of the input minbias karts, i.e., first 3 are '95 data, 
      last 2 are '96)
  
*****************
PASS 2.2    ee-X
*****************

strip off ee-gamma and eeee events,
they are on tapes RG1528 (files 1-22)
and RG1529 (files 1-22)
remaining files are in ~e871/strip/eex (ran out of karts)

ee mass > 360MeV
"good" pbg electron
"good" cer electron only if p < 8.3GeV